Description
Specifications:
Motor: Emerson 1/4 HP / 1750 rpm / 1/2″ shaft
Power: 115V 60 HZ
Belt Size: 1″x30″
Belt Speed: 875 Linear feet per minute
Oak-veneer plywood base 10″ wide & 20″ long
Guide Rail material is HDPE
Motor has a 1 year warranty, all other parts are custom made in the USA and carry a lifetime warranty
Manufactured in Forsyth, MO USA
Features;
- Preset Bevel Control Vises
- Horizontal Belt Plate
- Belt speed is less than 900 feet per minute. This lower speed helps prevents heat build up.
- Round wheel sharpening systems hollow grinds the micro edge making it weak and flimsy.
- This flat surface has a two bevel step making a much stronger micro edge.
- Belt tension is spring loaded for quick belt changes
Belt Centering lever is under the wood deck.
The motor is wired to run counter clockwise (CCW). The belt will be moving away from you and away from the edge of the knife.
The motor is wired to run counter clockwise (CCW). The belt will be moving away from you and away from the edge of the knife.
Comes with three belts grits.
Step #1 uses course 120 grit ceramic metal working belt.
Step #2 uses fine 600 grit silicon carbide belt.
Step #3 uses felt buffing belt.
*** Shipping can take 2-4 weeks if not in stock.
John B –
After watching Patrick take a knife from completely dull to lightsaber sharp in just a few minutes with one of the machines, I had to have one. It was worth every penny. Once I worked my way through all my various knives, I started sharpening for friends and family. Now that I am comfortable and confident with it and my results, I decided to buy a table at a small local gun show last weekend. I charge $2 per inch, and I was expecting to make some progress on paying for the sharpener, but what happened blew my mind. I was SWAMPED from the minute I got there until after the show ended! I WAY more than payed for the entire sharpening machine and belts for a long, long, long time to come. Needless to say, I now know what I am doing as a side job, because from here on out, it’s all gravy. I am firmly convinced there is no better sharpening machine made, and I can’t recommend it highly enough.
Jim S (verified owner) –
I\’ve spent a lot of money and time trying to find the best sharpening system possible (an obsession). This is a much better, faster, and less costly (high-end) sharpening system than any in my collection–which sadly, is vast. I agree with John B.–this is worth every penny and will get your knives well-beyond razor sharp! This system has my highest recommendation.
Patrick\’s customer service is tops. Anywhere.