MT Knives, Author at mtknives.net

December Update

Making progress everyday. So to stay on schedule I have to produce on average 6 knives a week. This has been taking me a full week working long hours 6 days a week. I started 9 last week.

working on the handles

I ordered a new surface grinder which was suppose to ship last week, However It finally shipped today. So was hoping to get 9 knives done last week but can’t seem to break the 1 a day average. Last night as I was finishing up my grinder broke!!! Set screws came loose […]

By MT Knives|2017-01-09T22:31:35-06:00December 17th, 2013|MT Knife News|Comments Off

December Week 1

Thanksgiving Was great! I spend the time with family and a little time in the shop 😉

The beginning stage after heat treat is to surface grind the surface to remove all scratches and make perfectly flat.

Attaching the G10 scales.
next I ruff out the shape, and sand the front of the scales.

one knife to rule them all

It is hard to get a […]

By MT Knives|2017-01-09T22:31:36-06:00December 7th, 2013|Knife Making|Comments Off

Protected: Stakeholder Meeting

By MT Knives|2017-01-09T22:31:36-06:00December 3rd, 2013|Stakeholders Only|Enter your password to view comments.

MT Knives News 11/22/13

Time keeps flying by, Send out 36-40 last week and almost finished 41-45 this week. Would be done but I wasn’t felling good at the start of the week and it really set me back. I hope to finish up 46-51 or more next week but we will see with Turkey day fast approaching. I picked up a few pointers from another knife maker on mirror finishes. It is hard to get a good mirror finish but I am getting better at it everyday. Here’s looking at you! 😉

Mirror Finish

I use calibers to make sure the grind is meeting up equally on both sides. I free hand my grinds. […]

By MT Knives|2017-01-09T22:31:36-06:00November 23rd, 2013|MT Knife News, Uncategorized|Comments Off

Protected: First 35 Knives Done and Out

By MT Knives|2014-06-05T08:31:03-05:00November 9th, 2013|Stakeholders Only|Comments Off

November Update Week 1

I finished up grinding and heat treating the rest of the First Limited Edition Knives, and started a prototype for the Second Limited Edition Knives. I posted a short video on updates for the knives and rocket stove along with the new grinder you can see it here.

For privacy reasons YouTube needs your permission to be loaded. For more details, please see our Data Protection and Privacy Policy.

By MT Knives|2017-01-09T22:31:37-06:00November 9th, 2013|MT Knife News|Comments Off

MT Knife News

Well it was a busy week, a lot of catching up from what didn’t get done last week. But some times you have to take that extra time and make sure everything is just right.

I am now officially over 1/3 of the way through the First Limited Edition run. I met with another knife maker this week to pick up some supplies, and to check out the knife he is making for me 😉 I am going to start collecting a knife from every knife maker that have learned from. That was my wife’s idea and I thought it was a good one.

I had a photographer come over and take some photos of some knives and thought I would share […]

By MT Knives|2017-01-09T22:31:37-06:00November 1st, 2013|MT Knife News|1 Comment

MT Knives News October Update

Stakeholder Knife Work Continues!

Sorry, I have been so busy I haven’t posted anything on here in too long. I am almost ready to finish up the second batch of Stakeholder MT Knives which should get me to #035 a little over 1/3 the way done!!! It is my goal to be able to finish all 100 knives before the end of the year, and I have been working as many hours as I can. Long days and late nights hopefully I can speed up after I get my new knife grinder that should be arriving next week!

Although I am trying to complete orders as fast as I can, I will not short quality! I […]

By MT Knives|2017-01-09T22:31:37-06:00October 24th, 2013|MT Knife News|3 Comments

Knife Making Handles – Some Progress

The first week was spent heat treating and getting the shop in order and cleaned up. I had some help for the first week and that was nice.Here’s some photos to show you some of my progress in making the Limited edition Stakeholder’s Knives.

Knives Surfaced Ground Knife Handle Pins Cut Knife Handle Scales Roughed Out and Drilled Cutting Knife […]

By MT Knives|2017-01-09T22:31:38-06:00September 20th, 2013|Knife Making|7 Comments

Protected: The Second Limited Edition Knife

By MT Knives|2017-01-09T22:31:38-06:00September 18th, 2013|Stakeholders Only|Enter your password to view comments.

MT Knives

About MT Knives

My Cart

Products